Settings

Owned by BAS-IP (Unlicensed)
Last updated: Nov 20, 2023
1 min read

A tamper is a button that is activated by an attempt to remove the device (it is installed on the panel back cover), for example, while stealing. When the tamper is triggered, the siren turns on and a notification is displayed in the log.

In this section, you can activate the tamper work. To do this complete steps: 

  1. Log in to the entrance panel web interface. By default, the username is admin, and the password is 123456.

  2. Open Security > Settings tab.

  3. Enable the feature.

  4. Submit settings.