Device description
- BAS-IP (Unlicensed)
AA-07BV/AA-07BC multi-apartment panels made it possible to make calls from this device to coordinate matrix, digital two-wire intercoms, and IP intercoms.
BAS-IP hybrid panels support simultaneous work with the following 4 systems:
Digital BAS-IP IP-system.
VoIP telephony systems (operating via SIP).
Coordinate system Vizit (Cyfral, Metakom, Eltis if you replace the switching blocks with blocks from the Vizit system).
Digital two-wire system Laskomex (RAIKMANN, RAINMAN, MARSHAL, KEIMAN, FILMAN, XVOICE).
You can install the AA-07BV/AA-07BC entrance panes into an existing analog coordinate (two-wire digital) intercom system and into a newly designed system.
The panels directly control the switching units. When connecting the panel to a coordinate matrix (two-wire digital) system, there is no need for additional configuration and programming, as the panel is already completely ready for operation. The subscriber numbers are set on the switching units or handsets by configuring jumpers and connecting them to the corresponding terminal block pins.
When connecting the panel to the Cyfral-100 or 200 series system, it is necessary to replace the Cyfral KMP-100 (KMG-100) switching units with Vizit BK-100 units for correct operation. In this case, all other connections and wiring to the subscriber devices (Cyfral audio handsets) remain the same and are performed following the Cyfral documentation.
When installing a panel within the Cyfral Intel system, it is necessary to completely replace the switching blocks and the rest of the matching blocks, followed by rewiring and reconfiguration of the system.
The main features and capabilities of the models are the same, but here are some peculiarities:
AA-07BV is a hybrid panel with support for coordinate matrix intercom systems (Vizit, Cyfral, Metakom, Eltis).
AA-07BC is a hybrid panel with support for two-wire digital intercom systems (Laskomex, Marshal, Raikmann, xVoice, and others based on Laskomex protocol).
Appearance
Â