Electrical connection

Owned by BAS-IP (Unlicensed)
Last updated: Nov 23, 2023
1 min read

After verifying whether a device is complete, you can switch to the connection step.

For connection you will need:

  • an Ethernet UTP CAT5 or higher cable connected to a network switch/router;

The maximum length of the UTP CAT5 cable segment should not exceed 100 meters, according to the IEEE 802.3 standard.

  • power supply at + 12V, 2 Amps; 

  • wires must be brought for connecting the lock and additional modules (optional). 

You can connect any type of electromechanical or electromagnetic lock for which the switched current does not exceed 5 Amps.

The following are typical connection schemes of all elements to the entrance panel:

Connection using an external power supply and an electromagnetic lock 

Connection using an external power supply and an electromechanical lockÂ