Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

For correct device functioning, you must enter information about its logical address. The logical address is used to automatically synchronize and search for other devices in the network and is also necessary to provide a connection between them (more information about logical address formation find here). These settings are also available in the web interface.

You must enter the following data about the device location:

  • building No. (from 0001 to 9999);
  • unit No. (from 00 to 99);
  • floor No. (from 00 to 98);
  • room No. (from 01 to 99);
  • device number (from 0 to 8);
  • sync code between monitors. 

After entering the data, save them.

  • No labels