Room settings
For correct device functioning, you must enter information about its logical address. The logical address is used to automatically synchronize and search for other devices in the network and is also necessary to provide a connection between them (more information about logical address formation find here). These settings are also available in the web interface.
You must enter the following data about the device location:
building No. (from 0001 to 9999);
unit No. (from 00 to 99);
floor No. (from 00 to 98);
room No. (from 01 to 99);
device number (from 0 to 8);
If you have only one number enter 0 for the device number. If you have more then the numbering must start with 0 and end with 8.Â
sync code between monitors.Â
After entering the data, save them.
Â
Â
Â