Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Here you can add or view a table with previously added identifiers. This table contains information about the identifier owner, its type, number, validity period, amount of available passes, and the number of the lock that identifiers are allowed to open. 








There is an option of everyday automatic deletion of guest identifiers that expired a week ago.  




How to add a new identifier to a panel memory?

1. Log in to the entrance panel web interface. By default, the username is admin and the password is 123456.

2. Go to Access management > Identifiers.

3. Click New Identifier.

4. Enter all required information in the opened window:

    • choose an Apartment number from the previously created list in the corresponding tab;
    • owner name; 
    • owner type: Guest or Owner;
    • identifier type and number;
    • choose Access restrictions (when access is allowed for the identifier) from the previously created list in the corresponding tab (optional);
    • set Period restrictions for identifier validity (optional);
    • set Passes restrictions (optional); 
    • set Lock # that is allowed to open for the identifier (#1, #2 (if SH-42 is used) or both);   

6. Confirm the information. 

If necessary, you can edit/delete added identifiers. 














How to configure License plates use as an identifier  

  1. For this identifier to work, you need an installed Axis camera with ALPR option and Axis License Plate Verifier software. Detailed information about software and its installation you can find on the Axis website.
  2. In AXIS License Plate Verifier, select HTTP Post protocol. 
  3. Enter server URL that consists of panel username and password, panel IP address, and API endpoint, where the camera will send the recognized number. For example, http://admin:123456@192.168.1.178/api/v1/access/plate/check, where the username is admin, the user password is 123456, and 192.168.1.178 is panel IP. 
  4. Save AXIS License Plate Verifier settings.  
  5. Open panel web interface. By default, the username is admin and the password is 123456.
  6. Go to Access management > Identifiers.
  7. Add license plate number as identifier. 

After these actions added license plate number will be recognized by the camera, and access will be provided for 10 sec.

  • No labels