After verifying whether a device is complete, you can switch to the connection step.
For connection you will need:
an Ethernet UTP CAT5 or higher cable connected to a network switch/router;
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters, according to the IEEE 802.3 standard.
power supply at + 12V, 2 Amps;
wires must be brought for connecting the lock and additional modules (optional).
You can connect any type of electromechanical or electromagnetic lock for which the switched current does not exceed 1 Amps.
The following are typical connection schemes of all elements to the entrance panel:
Connection scheme of electromechanical lock using external power supply for panel and the lock.
.jpg?version=1&modificationDate=1728897398284&cacheVersion=1&api=v2&width=760&height=506)
Connection scheme of electromagnetic lock using external power supply for panel and the lock.
