After verifying whether a device is complete, you can switch to the connection step.
For connection you will need:
- an Ethernet UTP CAT5 or higher cable connected to a network switch/router;
- power supply at + 12V, 2 Amps;
- wires must be brought for connecting the lock and additional modules (optional).
The following are typical connection schemes of all elements to the entance panel:
Connection using an uninterruptible power supply unit and an electromagnetic lock
Connection using an uninterruptible power supply unit and an electromechanical lock
Connection using an uninterruptible power supply unit and external power supply for an electromagnetic lock
Connection using an uninterruptible power supply unit and external power supply for an electromechanical lock
