You can open basic settings from a panel or a web interface. To enter the system settings, you must press the # button twice (the inscription "Admin" will appear on the screen). Then enter the admin password (the default password is 123456) and press # to confirm. This will open the settings menu.
Use the Up/Down arrows or the 2/8 buttons on your keypad to move between menus and fields. To confirm press the # button, and * if you need to go back.
Device Settings
In this menu, you can configure:
- panel operation mode;
- device language;
- panel logical address (Building No., Unit No., and Device No.);
- admin password to enter device settings and web interface;
- level of panel speaker volume;
- panel camera stream resolution (320x240/640х480/1280х720).
