...
In the Licenses tab, ensure that you have an integration with the Hikvision camera in your license and this option is enabled for the server.
Go to the Devices tab of the Device management section.
Click the plus icon in the left low corner.
Enter the device name.
Select the IP camera type.
Select the Hikvision camera with the ANPR model.
Enter any number for the Serial number field.
Select a group/subgroup where the device is functioning.
Add a description, if necessary.
Enter network settings for server and camera interaction:
enter the camera IP address and port
enter login and password to the camera
...
Copy the URL for the incoming events from the IP camera in the corresponding field.
...
Go to the Advanced settings of the Hikvision camera.
Paste the copied from the Link URL (for the incoming events from the IP camera) into the URL field of camera settings.
Enter the URL of your server in the Destination IP section.
...
Save settings.
Add license plate identifier as described here.
As a result, camera and server can interact with license plates.
AxxonOne camera configuration
In the Licenses tab, ensure that you have an integration with the AxxonOne server and its cameras in your license. In addition, this option is enabled for the server.
Go to the General tab > the Integration section.
Click the plus icon in the left low corner to add the integration with the AxxonOne server. You can add as many integrations as you need.
Enter the following information for the integration:
integration type: Axxon One
its name
AxxonOne server URL and port
login and password for the server
self-singed encryption certificate
...
Go to the Devices tab of the Device management section.
Click the plus icon in the left low corner.
Enter the device name.
Select the Barrier type for the AxxonOne cameras.
Select the AXXONONE model.
Select a group/subgroup where the device is functioning.
Add a description, if necessary.
Select the integration (created in Step 3,4).
Select the camera from the list of added to the AxxonOne server.
Set the checkpoint direction that this camera is used for entry or exit.So that the records of used guest passes are kept correctly. For example, if the barrier is used for exits, the number of passes will not be subtracted.
Select the macro(s) (commands) from the AxxonOne system used to open the barrier.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
The integration works through the BAS-IP server subscribing to events from macros on the AxxonOne server. |
...
Click the Save button in the left low corner when all required data will be entered.
Add license plate identifier as described here.
As a result camera and server can interact with license plates.
...