Versions Compared

Old Version 3

changes.mady.by.user Vladislav Turzai

Saved on

compared with

New Version 4

changes.mady.by.user Vladislav Turzai

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

Also, the same network settings as for the server must be entered in the device web interface. The management system must be enabled for the device:

  1. Log in to the device web interface. By default, the username is admin, and the password is 123456.

  2. Go to the Network tab > Management system section.

  3. Select the necessary protocol: HTTP or MQTT (is recommended to use) in the Mode field.

  4. Enter all required data. 

  5. Submit settings.

    1-20240125-120123.png

 Detailed instructions are here.

  1. In the Additional settings mark the panel is used with an Axis camera to identify a license plate.

...

    ...

    1. Click the Save button in the left low corner when all required data will be entered.

    2. Add license plate identifier as described here.

    As a result, everything is ready for the Link interaction with license plates.