...
- auto ending a call when you press the lock open button;
- opening the lock via Bluetooth when you turn on the smartphone screen and the lock is detected;
- setting the Bluetooth sensitivity value (from 100 to 50) that stands for the distance (between a phone and a panel reader) at which the lock opening signal will be transmitted and received. We recommend setting a 75 value, as it helps to open only the lock that is close enough to a user phone and avoid all detected locks opening (if a high value is set). The lower value is set, the closer the action radius is;
- setting the timeout after which it will be possible to open (from 1 to 10 s) between sending signals for opening the lock (via Bluetooth) again when approaching it. So, if you open a lock using UKEY, next time you can open the lock after indicated timeout;
- enabling/disabling collapsed banners that change notifications form (they are not full-screen);
...