Versions Compared

Version Old Version 3 New Version 4
Changes made by

BAS-IP

Karyna Kompaniiets

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

  1. Go to the Devices tab of the Device management section.

  2. Click plus icon in the left low corner.

  3. Enter the device name.

  4. Select its type: panel, monitor, access controller.

  5. Select the device model.

  6. Indicate the device Serial number (check the Dashboard tab of the device web interface or device box).

  7. Select a group/subgroup where the device is installed.

  8. If necessary, set panels location geodata. This data is required for the Link app, when a visitor with a pass (added to Apple Wallet) approaches the available panel (with location), the pass will be automatically shown.

  9. Add a description, if necessary.

  10. Enable using a camera to identify license plates, if necessary. 

  11. Allow remote lock opening (from the device web interface, via API), if necessary. 

...

Info

Also, the same network settings as for the server must be entered in the device web interface. The management system must be enabled for the device:

  1. Log in to the device web interface. By default, the username is admin, and the password is 123456.

  2. Go to the Network tab > in the Management system section.

  3. Select the necessary protocol: HTTP or MQTT (is recommended to use) in the Mode field.

  4. Enter all required data. 

  5. Submit settings.

 Detailed instructions are here.

...