License plates can be used as identifiers to open the barrier. For this identifier to work, you need an additional IP camera with an ALPR option for plate scanning. BAS-IP Link server is only compatible with Axis, Hikvision, or AxxonOne cameras. Below you will find detailed instructions on configuring each camera to interact with the server and using license plates as IDs.
Hikvision camera configuration
In the Licenses tab, ensure that you have an integration with the Hikvision camera in your license and this option is enabled for the server.
Go to the Devices tab of the Device management section.
Click the plus icon in the left low corner.
Enter the device name.
Select the IP camera type.
Select the Hikvision camera with the ANPR model.
Enter any number for the Serial number field.
Select a group/subgroup where the device is functioning.
Add a description, if necessary.
Enter network settings for server and camera interaction:
enter the camera IP address and port
enter login and password to the camera
Be aware that the camera must be within the same network as the server or available for interaction via the Internet.
In the Additional Settings, select the ID of the alarm output relay on the camera that must be activated when the license plate is recognized.
Also, set a timeout for this relay activity.
Click the Save button in the left low corner when all required data will be entered.
As the camera is added, click it from the list of all devices.
Copy the URL for the incoming events from the IP camera in the corresponding field.
Go to the Advanced settings of the Hikvision camera.
Paste the copied from the Link URL (for the incoming events from the IP camera) into the URL field of camera settings.
Enter the URL of your server in the Destination IP section.
-20240602-224135.png?version=2&modificationDate=1717424144008&cacheVersion=1&api=v2&width=650&height=204)
Save settings.
Add license plate identifier as described here.
As a result camera and server can interact with license plates.