In panel settings, you can enable/disable and configure the feature of sending photos from the panel camera to the BAS-IP Link server.
The feature works only when synchronization with Link is enabled (use this manual for Link configuration).
How to configure Sending photos to the server feature
Log in to the entrance panel web interface. By default, the username is admin and the password is 123456.
Go to Logs > Sending photos to the server.
Enable the feature by ticking corresponding field.
Select events from the list to send photos when they happen:
access denied by not valid identifier;
access denied by not valid Face ID;
access denied by not valid input code;
access denied by remote server API call;
access denied by the web API call;
access denied by unknown card;
access granted by API call;
lock opened by response device;
access granted by master code;
access granted by remote server API call;
access granted by valid identifier;
access granted by valid Face ID;
lock is opened too long;
lock opened by exit button;
lock was opened by free access button;
incoming call;
outgoing call;
incorrect login API call;
successful login API call;
device rebooted;
SIP registration lost;
tamper triggered.
Submit settings.
