Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

On the main desktop, next to the call icon, you can check the number of missed calls. 

When the Motion detection feature is enabled, missed calls are displayed in the right corner of the call icon, and notifications of videos recorded when motion sensors are triggered are displayed in the left corner.

By pressing the icon, the call history is displayed:

Icons meaning:

- missed call; 

- оutgoing call;

- incoming call;


An entry about a call contains the following info:

  • date and time when a call was made;
  • subscriber number;
  • сonversation duration.

 To open additional options, tap the entry.

Icons meaning:

 - to call the selected number;

- to view photos/videos taken during the call;

- to save photos/videos taken during the call to SD card;

- to delete the entry;

Call display 

During the incoming call, the following screen will be displayed: 

Icons meaning:

- to answer a call;

- to decline a call/end a conversation;

- to open the keyboard;

- to open the lock/s; 

- to turn on/off the microphone;

- to record the video of the conversation;

- to take a photo of the screen;

In the monitor settings or web interface, you can enable answerphone feature (SD card is required for the feature). If there is no response within 30 seconds, the monitor will start recording a message from the visitor. This message will be displayed as a missed call on the main desktop. 

All videos are stored in the Records folder on the SD card. But to watch a video, you only have to open Recent section, tap the missed call entry and open call media. Press the video to watch it. 

   

Contacts

For quick access, you can save up to 10,000 contacts. They can be inner numbers of panels, concierges, another monitors or SIP number of any device. You can add contacts in this monitor menu or in the web interface.

How to add contact via a monitor

  1. Open the Call menu and go to the Contacts tab. 

  2. Press plus icon in the left low corner.

  3. Enter contact name.
  4. Specify number type: inner or SIP (required for entering a number in the correct format).
  5. Select device type: multi-apartment panel, individual panel, or regular device (monitor or any other device). This data is also necessary for the correct contact display in various sections of the monitor.

  6. Enter a number in the corresponding format.

  7. You also have several additional options:
    1. to add the contact to favorites and it will be displayed at the top of the list;
    2. to add the contact to the blacklist and not receive notifications about calls from this contact (but a call will be displayed as missed in the list); 
    3. to accept calls from this contact automatically (autoanswer);
    4. for multi-apartment and individual panels, you can select the Use as default option. In this mode, the selected panel will be displayed by default when opening panel monitoring menu.
  8. Press Add contact after entering all the required data. 

If you tap a contact card, its detailed info will be displayed.

By pressing the star icon, you can add a contact to favorites so that it appears at the top of your contacts list.

Press the button with three dots, to edit or delete a contact. 

To make a call, press the call button on the right. 

Contacts search 

To quickly find a required contact, enter its name in the search bar.

Devices 

This menu displays additional monitors that have the same logical address but different device numbers.

If you press the button in the upper left corner near the device, the menu for editing the name will be displayed. In the new window, you can enter the name of the additional monitor you want to display.

After pressing the Apply changes button, the updated device name will be displayed. You can also refresh the page by dragging the page down.

By pressing the Delete button (in the lower right corner), you can restore the default device names.

Motion detections 

This tab will appear in the menu if you have enabled and configured the feature of recording video when a motion sensor is triggered. Here you can view the recorded videos. The tab contains information about the date, time, duration of the recording and the name of the camera from which the video was recorded.

If necessary, you can delete a video by pressing the corresponding button on its card or delete all videos using the button in the lower right corner.

  • No labels