To configure a monitor remotely through the web interface, you must connect to the device via an internet browser on a PC. The monitor and PC from which you plan to access the device must be connected to the same network segment.
In the Internet browser, you must enter the monitor IP address into the address input line. To find the device and figure out its IP address you can use this search and upgrade tool (that shows all connected to the network devices) or check the monitor settings (if the network data has already been entered while configuration).
After entering an IP address in the browser, a window to type a login and password will appear. At the top right corner, you can change the interface language. English, Ukrainian, Spanish, Polish, Dutch, French and Russian languages are available.
Also, you can find a device model name at the left lower corner and the current firmware version at the right lower corner.
Default values to enter the web interface:
Login: admin
Password: 123456
The password for logging into the web interface is the administrator password. By default, it is 123456, but you can change it in the appropriate tab.
