Misc settings

You can open basic settings from a panel or from a web interface. To enter the system settings, you must press the # button twice (the inscription Admin will appear on the screen). Then enter the admin password (the default password is 123456) and press # to confirm. This will open the settings menu.

Use the Up/Down arrows or the 2/8 buttons on your keypad to move between menus and fields. To confirm press the # button, and * if you need to go back.

In this menu, you can:

add a user access card to the panel memory;

You can add a card both in this menu and in the web interface (see the Access management or Identifiers section).

To add a card via the panel interface:

Enter a random number in the RoomNum field.
Bring the card to the reader area. You will hear a beep as confirmation that the card is added. Also, its number will be shown in the Card field.
The card number will be displayed in the Identifiers tab of the web interface, where you can add all the necessary information about the user and link the card to the corresponding apartment.

reboot the panel. To do it, you must enter 1 and press #.
reset panel settings to default settings. To do it, you must enter 1 and press #. Panel reset will delete all cards.

Panel reset will delete all cards.