Device settings
To access system settings, open the Pincode menu from the main screen, enter the settings password you created when first setting up the device or after a factory reset, and press the Lock button.
As a result, the settings menu will be opened. To go to the necessary menu, select it from the list:
Device Settings
In this menu, you can configure:
Panel operation mode;
Wall mode — used when the panel is installed on the perimeter of the object. In this case, you must enter Building No., Unit No., Floor No., and Apartment No. to call the necessary monitor.
Unit mode — used when the panel is installed near the unit entrance. In this case, it is enough to enter Floor No. and Apartment No. to call the necessary monitor.
Device language: English, Ukrainian, Spanish, Polish, Dutch, Turkish, French, Danish, Portuguese, German, Russian;
Panel logical address: Building No., Unit No., and Device No.;
For correct functioning, the panel and the monitor must have the same building and unit number in apartment settings. For monitors, you must also indicate information about the floor, apartment, and device number.
If you have more than one entrance panel with the same logical address, you must specify their device numbers, starting from 1 for the main device and from 2 to 9 for the others.
Settings password for accessing the panel interface (GUI). This password is separate from the web interface admin password and can be disabled if needed;
Speaker volume level;
Panel camera stream resolution: 640×480, 1280×720, or 1920×1080 (optional).
