Phone

Owned by BAS-IP (Unlicensed)
Last updated: Nov 24, 2023
3 min read

Time / Language

Select “Time / Language” to access the language and time settings:

Web language

Type: Used web language

NTP

Time zone: Time zone is GMT.

Primary server: The address of the primary NTP server.

Secondary server: The address of the additional NTP server.

Update interval: Interval of updating the time (> = 3600 seconds).

System time: Current system time.

Call Feature

Select “Call Feature” to access the call settings.

Mode: Current operating mode. Phone or custom.

Mode settings

Return code when refuse: The code returned by the device in case of call refusing (404 Not Found, 480 Temporary Unavailable, 486 Busy Here, 603 Decline).

Auto answer delay: Delay time until the panel makes auto answer (0 - 5 seconds).

Auto answer mode: The function which allows selecting the audio or video transmission during a call.

Multicast codec: Codec for calls via Multicast (PCMU, PCMA, G722, G729).

Direct IP: Call using P2P.

For proper operation of the internal protocol, this function must be enabled.

Voice

Select “Voice” to access the voice settings:

Microphone volume

Volume: The microphone volume level (1-15).

Speaker volume

Speaker Volume: The speaker volume level (1 - 15).

Open door warning

Open door warning: Enable/disable sound when the door is opened.

Open door failed warning: Enable/disable sound when you place unregistered card.

Upload sound for unlock

Here you can upload the audio file that will be played when the door is opened (file format: wav, size: <200KB, sampling: 16,000, Bits: 16).

Upload sound for error

Sound when there is an error: The audible sound may be enabled/disabled when you place unregistered card. (file format: wav, size: <200KB, sampling: 16,000, Bits: 16).

Multicast setting

Number of listened addresses: Number of IP addresses which are listened to find out the multicast requests (Off, 1 - 10).

Priority: The priority of addresses listening.

Call log

Select “Call log” to access the call history:

In this tab, it is possible to make an outgoing call by pressing the corresponding number in the "Number" column.

Door log

Select “Door log” to access the door log history:

In this tab all access by card events are displayed.