Versions Compared

Old Version 1

changes.mady.by.user Vladislav Turzai

Saved on

compared with

New Version Current

changes.mady.by.user Vladislav Turzai

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

License plates can be used as identifiers to open the barrier. For this identifier to work, you need an additional IP camera with an ALPR option for plate scanning. Axis provides the ability to use license plates as identifiers for automatic barrier gate opening, utilizing the ALPR option for their recognition and scanning. The BAS-IP Link server is compatible not only compatible with Axis cameras but also with cameras from other manufacturers, such as Hikvision, or AxxonOne cameras

Axis camera configuration

and Axxon One, which also support this option.

  1. In the Licenses tab, ensure that you have license plate recognition in your license and this option is enabled for the server.

...

Info

Also, the same network settings as for the server must be entered in the device web interface. The management system must be enabled for the device:

  1. Log in to the device web interface. By default, the username is admin, and the password is 123456.

  2. Go to the Network tab > Management system section.

  3. Select the necessary protocol: HTTP or MQTT (is recommended to use) in the Mode field.

  4. Enter all required data. 

  5. Submit settings.

    1-20240125-120123.png

 Detailed instructions are here.

  1. In the Additional settings mark the panel is used with an Axis camera to identify a license plate.

...

    ...

    1. Click the Save button in the left low corner when all required data will be entered.

    2. Add license plate identifier as described here.

    As a result, everything is ready for the Link interaction with license plates.