Integration with Hikvision

Integration with Hikvision

Hikvision cameras can be used as license plate recognition devices in conjunction with BAS-IP Link.

The camera communicates directly with the Link server, so no BAS-IP entrance panel or other devices are required. Depending on the selected access decision mode, access decisions are made either by BAS-IP Link or by the camera itself.

Once the integration is configured, the administrator or end user can create an identifier of the license plate number type and assign it to a specific Hikvision camera.

  • Server-based decision — Link processes recognition events, checks its identifiers database, and sends a command to activate the camera relay when access is granted;

  • Camera-based decision — Link sends license plate information to the camera Allowlist. The camera makes access decisions independently and sends the results to Link for logging.

 

To use this integration, you need the following:

  • A Link server with a license that includes integration with Hikvision ANPR;

  • For BAS-IP Link Cloud, this integration requires a Plus license;

  • A Hikvision camera that supports ANPR and integration via ISAPI;
    (Since product lines may change, we recommend checking compatible models with the manufacturer).

 

Tested camera models and firmware versions

Camera model

Firmware version

Camera model

Firmware version

iDS-2CD7A26G0/P-IZHS

v5.8.10 build 230106

iDS-2CD7A26G0/P-IZHS

v5.8.60 build 240906

DS-TCG406-E

v5.4.0 250428

According to Hikvision documentation available at the time of integration development, the following camera models support ISAPI. However, ISAPI support does not guarantee ANPR compatibility. Contact the manufacturer to confirm ANPR support for a specific model:

iDS-2CD7026G0(-AP), iDS-2CD7026G0/EP-IHSY, iDS-2CD7026G0/P-AP, iDS-2CD7046G0(-AP)(/F11), iDS-2CD7046G0/E-IHSY(/F11)(R), iDS-2CD7046G0/EP-IHSY, iDS-2CD7046G0/H-AP, iDS-2CD7046G0/P-AP, iDS-2CD7046G0/S-AP, iDS-2CD7086G0(-AP), iDS-2CD7086G0/H-AP, iDS-2CD70C5G0(-AP), iDS-2CD70C5G0/E-IHSY(R), iDS-2CD70C5G0/H-AP, iDS-2CD7126G0-IZ(H)S(Y), iDS-2CD7146G0-IZ(H)S(Y), iDS-2CD7146G0/C-IZS, iDS-2CD7146G0/H-IZ(H)S(Y), iDS-2CD7186G0-IZ(H)S(Y), iDS-2CD7186G0-IZS, iDS-2CD7186G0/H-IZ(H)S(Y), iDS-2CD71C5G0-IZS, iDS-2CD71C5G0/H-IZ(H)S(Y), iDS-2CD7347G0-XS, iDS-2CD7387G0-XS, iDS-2CD7526G0-IZHS(Y), iDS-2CD7546G0-IZHS(Y), iDS-2CD7547G0-XZHS(Y), iDS-2CD7547G0/P-XZHS(Y), iDS-2CD7586G0-IZHS(Y), iDS-2CD7587G0-XZHS(Y), iDS-2CD75C5G0-IZHS(Y)(R), iDS-2CD7A26G0-IZHS(Y), iDS-2CD7A26G0/P-IZHS(Y), iDS-2CD7A45G0-IZ(H)S(Y), iDS-2CD7A45G0/P-IZHS(Y), iDS-2CD7A46G0-IZHS(Y), iDS-2CD7A46G0/H-IZHS(Y), iDS-2CD7A46G0/P-IZHS(Y), iDS-2CD7A46G0/S-IZHS(Y), iDS-2CD7A47G0-XZHS(Y), iDS-2CD7A47G0/P-XZHS(Y), iDS-2CD7A86G0-IZHS(Y), iDS-2CD7A86G0/H-IZHS(Y), iDS-2CD7A87G0-XZHS(Y), iDS-2CD7AC5G0-IZHS(Y)(R), iDS-2CD7AC5G0/H-IZHS(Y), iDS-2CD7D47G0-XS, iDS-2CD7D87G0-XS, iDS-2CD7T47G0-XHS(Y), iDS-2CD7T87G0-XHS(Y), iDS-2CD8A46G0-XZ(H)S(Y), iDS-2CD8A47G0/SC-ZY, iDS-2CD8A48G0-XZ(H)S(Y), iDS-2CD8A86G0-XZ(H)S(Y)

  • As the integration is implemented on the BAS-IP side, you can contact Technical Support if you need help with setup or have suggestions.

In addition to Hikvision, the BAS-IP Link server also supports license plate recognition integrations with other manufacturers, such as Axis and Axxon One, provided their devices support ANPR and event-based communication.

 

How to set up Hikvision ANPR integration:

Before configuring the integration, make sure the correct Area and Country/Region are selected in the Hikvision camera settings. Incorrect region settings may cause the camera to send a different license plate value, which BAS-IP Link will treat as an invalid identifier.

  1. In the Licenses tab, ensure that you have an integration with the Hikvision camera in your license and this option is enabled for the server.

    lisences-20240602-220600.png
  2. Go to the Devices tab of the Device management section.

  3. Click the plus icon in the left low corner.

  4. Enter the device name.

  5. Select the IP camera type.

  6. Select Hikvision camera with ANPR in the Model field.

  7. Enter the full camera serial number in the Serial number field, including the model prefix, exactly as provided by the camera. For example: iDS-2CD7A46G0/P-IZHS20250619AAWRGB8289179.

Знімок екрана 2026-09-25 о 15.07.57.png
  1. Select a group/subgroup where the device is functioning.

  2. Add a description, if necessary.

  3. In the Network tab, enter the camera connection settings:

    • IP address and Port;

    • Login and Password.

Be aware that the camera must be within the same network as the server or available for interaction via the Internet.

  1. In the Additional settings tab, enter the ID of the alarm output relay on camera.

  2. Set the Timeout for disabling alarm request (seconds). The minimum value is 3 seconds.

Знімок екрана 2026-09-25 о 15.14.04.png
  1. Click Save to add the camera.

  2. Once the camera is added, select it from the device list.

camera device-20240602-222919.png
  1. Copy the URL for the incoming events from the IP camera in the corresponding field.

IP camera added-20240602-223255.png
  1. Go to the Advanced settings of the Hikvision camera.

  2. Enter the event path copied from BAS-IP Link into the URL field in the Hikvision camera settings.

  3. Enter the URL of your server in the Destination IP / Host section:

  • for Link self-host, enter the address of your Link server. It can be a local IP address or a public domain name;

  • for BAS-IP Link Cloud, use the domain of your regional Cloud server.

Example for Destination IP / Host:

Link self-host:
192.168.1.93
link.example.com

Link Cloud:

The URL field must contain the event path copied from the Link device settings, for example:

/api/v0/hikvision/392.XtMowisZdHW6wsJ
image4 (1)-20240602-224135.png
  1. Save settings.

  2. Add a license plate identifier as described in the Identifiers section.

 

Camera-based decision

By default, newly added Hikvision cameras use Server-based decision. To enable Camera-based decision, follow these steps:

  1. Go to Device management → Devices and open the Hikvision camera for editing.

  2. Open the Additional settings tab.

  3. In Access decision mode, select Camera-based decision.

  4. Click Save.

1.png
  1. Go to Device management → Queue tasks to check the configuration task. When the task is completed successfully, its status changes to Completed, and the result displays Hikvision ANPR control mode configured.

2.png

BAS-IP Link sends license plate information to the camera Allowlist. The camera independently makes access decisions and sends the results to Link for logging.

3.png

Access decisions made by the camera are recorded in Access management → ACS logs.

4.png