Advanced

Owned by BAS-IP (Unlicensed)
Last updated: Dec 24, 2023
3 min read

In this tab, you have the opportunity to set a screensaver for the monitor, enable/disable displaying announcements in standby mode, set links for the Services menu, etc. These settings can also be configured in the monitor settings.

Announcement 

Here you can enable/disable the display of announcements or ads for the standby mode. For the feature to work, you must:

  1. Enable an announcement display.

  2. Enter a link to the announcement (it can be either an RTSP stream or a web page).

  3. Set a timeout (period of time) for displaying from 10 to 300 sec.

  4. Submit settings.

With the help of the Show ad immediately button, you can check your announcement display.

Standby Mode 

In addition to an announcement, you can set other screensavers (clock, photo frame, IP cameras) for standby mode. 

How to set the screensaver for a monitor standby mode via the web interface  

  1. Log in to the device web interface. By default, the username is admin, and the password is 123456.

  2. Open the Advanced tab and find the Standby mode section.

  3. Select the desired type and enter the required data. 

Screensaver types: 

  • clock; 

  • photo frame mode is a display of selected photos. For this screensaver you must:

    • enable/disable the clock display in photo frame mode;

    • select a folder in the file system where the photos for display are located.

  • IP cam single. You must select one IP camera (from the previously added ones) for its stream display;

  • IP cam tour display streams from selected cameras one by one. So, you must select cameras (from the previously added ones) for display, and set the timeout for switching between them;

  • in the Quad Splitter mode, streams from 4 cameras are displayed at once (mode is available for all monitors except AQ-07LA). Accordingly, you must select 4 cameras for broadcasting. 
    You must specify the RTSP links of the additional camera stream with a resolution of no more than 1280x720 for the correct display.

  1. Submit settings. 

Service links 

In this menu, you can enter links that will be opened by pressing the corresponding buttons in the Services menu.

Elevator modules 

With the EVRC IP module, you can call the elevator from the monitor. In this menu, you can set the numbers of the elevator module and its name for their correct display.

Logo 

The BAS-IP logo is displayed in the upper right corner. In this section, you can change the default image.

How to change the logo displayed on the monitor screen

  1. Open the Logo section in the Advanced tab of the web interface.

  2. Click Choose file and select the desired image.

  3. To upload the image, click Submit.

You can set the default logo by clicking the corresponding button. And by clicking Preview, you will see the current logo.