Advanced

Owned by BAS-IP (Unlicensed)
Last updated: Jan 08, 2024 by Dev BAS-IP
4 min read

In this tab, you have the opportunity to set a screensaver for the monitor, enable/disable displaying announcements in standby mode, set links for the Services menu, etc. These settings can also be configured in the monitor settings.

Announcement 

 Here you can enable/disable the display of announcements or ads for the standby mode. For the feature to work, you must:

  1. Enable an announcement display.

  2. Enter a link to the announcement (it can be either an RTSP stream or a web page).

  3. Set a timeout (period of time) for displaying from 10 to 300 sec.

  4. Submit settings.

With the help of the Show ad immediately button, you can check your announcement display.

Standby Mode 

In addition to an announcement, you can set other screensavers (clock, photo frame, IP cameras) for standby mode. 

How to set the screensaver for a monitor standby mode via the web interface  

  1. Log in to the device web interface. By default, the username is admin, and the password is 123456.

  2. Open the Advanced tab and find the Standby mode section.

  3. Select the desired type and enter the required data. 

Screensaver types: 

  • clock. For the Clock screensaver, you must set the time after which it will be turned off; 

  • a photo frame mode is a display of selected photos. For this screensaver you must:

    • enable/disable the clock display in photo frame mode;

    • select a folder in the file system where the photos for display are located;

    • set the time after which the screensaver will be turned off.

  • IP camera mode is a display of one or several cameras RTSP stream. There are 3 variants: 

    • single camera display. You must select one IP camera (from the previously added ones) for its stream display and set the screensaver off time;

    • in the tour mode selected IP cameras streams are displayed one by one. So, you must select cameras (from the previously added ones) for display, set the time interval for switching between cameras, and the screensaver off time;

    • in the quad splitter mode, streams from 4 cameras are displayed at once (mode is available for all monitors except AQ-07LA). Accordingly, you must select 4 cameras for broadcasting and set the screensaver off time. 
      You must specify the RTSP links of the additional camera stream with a resolution of no more than 1280x720 for the correct display.

  1. Submit settings.

RTSP feed

By entering RTSP streams (up to 4) in this section, you can stream images from third-party IP cameras on a monitor during a call from AM-02 to another device, for example, indoor monitor. 

  1. Generate an RTSP stream of the camera according to its manual.   

  2. Log in to the device web interface. By default, the username is admin, and the password is 123456.

  3. Open the Advanced tab.

  4. Enter generated at 1st step URL at. You can add up to 4 RTSP streams.

Example of the URL for RTSP stream:

rtsp://admin:123456@192.168.1.87:8554/ch01 

It includes the username (admin), user password (123456),  panel IP (192.168.1.87); a number of a camera access port (8554); channel number (ch01).

  1. Save settings by clicking Submit.

During a call from AM-02 to indoor monitor, open the keyboard on the monitor and switch between cameras by pressing 0-4 buttons (0 - AM-02 camera, 1-4 - additional cameras).

Service links 

In this menu, you can enter links that will be opened by pressing the corresponding buttons in the Services menu.

Elevator modules 

With the EVRC IP module, you can call the elevator from the monitor. In this menu, you can set the numbers of the elevator module and its name for their correct display.

Logo 

The BAS-IP logo is displayed in the upper right corner. In this section, you can change the default image.

How to change the logo displayed on the monitor screen

  1. Open the Logo section in the Advanced tab of the web interface.

  2. Click Choose file and select the desired image.

  3. To upload the image, click Submit.

You can set the default logo by clicking the corresponding button. And by clicking Preview, you will see the current logo.