Mechanical mounting
BA-04MD/BA-08MD
Before mounting the door panel, a hole or recess in the wall with dimensions 142×245×60 mm (for flush mounting) must be provided. Overall dimensions of the bracket (flush box) = 142×245×55 mm. It is also necessary to provide for the supply of power cable, add. modules and local network.
Attention:
The hole at the bottom is designed to drain the water. Do not intentionally close it. Also, it is necessary to make a drain for water at the bottom of the niche which will serve to divert water out.
BA-12MD
Before mounting the door panel, a hole or recess in the wall with dimensions 355 × 140 × 53 mm (for flush mounting) must be provided. Overall dimensions of the bracket (flush box) = 355 × 140 × 53 mm. It is also necessary to provide for the supply of power cable, add. modules and local network.