Mechanical mounting

Before installation of the outdoor panel it is necessary to provide a hole or a recess into a wall with dimensions 143×353x61 mm (for flush mount) dimensions of the bracket (mounting box) = 141×351×60 mm.

It is also necessary to provide supply of a power cable, additional modules and the local network.

Attention: The hole at the bottom is designed to drain the water.
Do not intentionally close it. Also it is necessary to make a drain for water at the bottom of the niche which will serve to divert water out.

AA-07FB/AA-07FBI/AA-07FBC

Mechanical mounting

Analytics

Related content