Electrical connection
- BAS-IP (Unlicensed)
Owned by BAS-IP (Unlicensed)
After verifying the device completeness, you can start the connection.
IMPORTANT!
It is strictly forbidden to supply more than + 12.1V to the button.
It is not allowed to exceed the current flowing through the switch contacts of more than 100 mA.
It is strictly forbidden to use the button to use the power supply used to power the lock.
It is necessary to use a separate power supply to which locks and other high-consumption equipment are not connected.
Purpose of wires:
Red: + 12V (+ 1%, - 15%);
Black: Ground (General);
Brown: Transfer to trigger mode;
Green: Changes the backlight color to green;
Yellow: Controlled output.
Connection scheme SH-45
Connection scheme SH-45T
