/
Electrical connection
Document toolboxDocument toolbox

Electrical connection

Owned by BAS-IP (Unlicensed)
Last updated: Nov 17, 2023
1 min read

After verifying the device completeness, you can start the doorbell connection.

IMPORTANT!
It is strictly forbidden to supply more than + 12.5V to the bell.

It is not allowed to exceed the current flowing through the switch contacts of more than 100 mA.

It is necessary to use a separate power supply to which locks and other high-consumption equipment are not connected!

Purpose of wires:

  • Red: + 12V (+ 1%, - 15%);

  • Black: Ground (General);

  • Brown: Transfer to trigger mode;

  • Green: Changes the backlight color to green;

  • Yellow: Controlled output (when pressed, voltage is removed and ground appears).

Related content