...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Axis camera configuration
In the Licenses tab, ensure that you have license plate recognition in your license and this option is enabled for the server.
...
Ensure that you have all the required elements for the plate scanning. For this identifier to work, you need a BAS-IP panel and an installed Axis camera with the ALPR option. Also, you are required an Axis license that gives you an Axis License Plate Verifier. Detailed information about software and its installation can be found on the Axis website.
In the AXIS License Plate Verifier, select the HTTP Post protocol.
Enter the server URL that consists of the panel username and password, panel IP address, and API endpoint, where the camera will send the recognized number. For example, admin:123456@192.168.1.178/api/v1/access/plate/check, where the username is admin, the user password is 123456, and 192.168.1.178 is panel IP.
Save AXIS License Plate Verifier settings.
Open panel web interface. By default, the username is admin and the password is 123456.
...
Go to the Devices tab of the Device management section to add the panel to the Link.
Click the plus icon in the left low corner.
Enter the device name.
Select the panel type and its model.
Indicate the device Serial number (check the Dashboard tab of the panel web interface or device box).
Select a group/subgroup where the device is functioning.
If necessary, set location geodata for panels. This data is required for the Link app, when a visitor with a pass (added to Apple Wallet) approaches the available panel (with location), the pass will be automatically shown.
Add a description, if necessary.
Enter network settings for server and panel interaction:
select the appropriate communication protocol: HTTP or MQTT (is recommended to use);
enter the device IP address and port (for HTTP only);
enter login and password that are used to enter the device web interface;
indicate server interaction password (is created in the Management system section (Network tab) of the device web interface).
| Info |
|---|
Also, the same network settings as for the server must be entered in the device web interface. The management system must be enabled for the device:
Detailed instructions are here. |
In the Additional settings mark the panel is used with an Axis camera to identify a license plate.
...
14. Click the Save button in the left low corner when all required data will be entered.
Add license plate identifier as described here.
As a result, everything is ready for the Link interaction with license plates.
Hikvision camera configuration
...
As a result, camera and server can interact with license plates.
...
Axxon One configuration
In the Licenses tab, ensure that you integrate with the Axxon One server and its cameras in your license. In addition, this option is enabled for the server.
Go to the General tab > the Integration section.
Click the plus icon in the low left corner to add the integration with the Axxon One server. You can add as many integrations as you need.
Enter the following information for the integration:
integration type: Axxon One
its name
AxxonOne server URL and port
login and password for the server
self-singed encryption certificate
| Info |
|---|
More about Axxon One server configuration and requirements you can find in the Installing the software package or Operating system requirements guidesAll requirements for the Axxon One software package are described in the corresponding article. Be aware that ports for the BAS-IP Link and the Axxon One software must not coincide. |
...
Click the Save button in the left low corner when all required data will be entered.
Go to the Devices tab of the Device management section.
Click the plus icon in the left low corner.
Enter the device name.
Select the Barrier type for the Axxon One cameras.
Select the AXXONONE model.
Select a group/subgroup where the device is functioning.
Add a description, if necessary.
Select the integration (created in Step 3,4).
Select the camera from the list of added to the Axxon One server.
Set the checkpoint direction that this camera is used for entry or exit.So that the records of used guest passes are kept correctly. For example, if the barrier is used for exits, the number of passes will not be subtracted.
Select the macro(s) (commands) from the Axxon One system used to open the barrier.
...