Network settings

You can open basic settings from a panel or a web interface. To enter the system settings, you must press the 📞 button twice (the inscription Admin will appear on the screen). Then enter the admin password you created when first setting up the device or after a factory reset, and press 📞 to confirm. This will open the settings menu.

Use the Up/Down arrows or the 2/8 buttons on your keypad to move between menus and fields. To confirm press the 📞 button, and X if you need to go back.

Here you can turn on/off DHCP connection and get network settings automatically or enter it manually.  

For correct panel work you must enter: 

• Panel IP address. By default, a device can have a static IP address 192.168.1.90 or 192.168.1.91.;

• Subnet mask;

• The main gateway;

• DNS server address;

• Server is necessary if Link software is installed.

Open