Scene settings

With this section, you can set sensors that will be triggered in a corresponding scene. You can find the connection scheme of the sensors on the Electrical connection page.

There are 3 available scenes (Out, Home, Sleep) for various occasions. To configure their operation, select which sensors should be enabled/disabled for each scene.

The scene setting is only available on the main monitor (with 0 device number).

Activation time (from 0 to 300 sec) is the time after which the monitor will switch to security mode and activate the necessary scene.

These settings are also available in the web interface.

When a sensor is triggered, an alarm signal will be sent to the main and all synchronized monitors.

To disable the alarm, enter the administrator password on the device. The default password is 123456.