How to configure two-way video during the call

Owned by BAS-IP (Unlicensed)
Last updated: Dec 28, 2023
1 min read

Only modifications of AA-14 series entrance panels support receiving and displaying a video during the call.

Two-way video can be used only when the call was initiated from entrance panel side.

  1. Log in to the device web interface. By default, the username is admin, and the password is 123456.

  2. Go to the Panel tab > Call settings section.

  3. Enable automatically accept video option.

  4. Submit settings. 

So, during the outgoing call, the video from the callee camera (if it is) will be shown on the panel display.