Queue tasks

Owned by Vladislav Turzai
Nov 12, 2024
2 min read

Some data for devices (SIP, Network, or Address settings), adding/deleting identifiers can be done in the Link and sent to the required device. In this section, you can monitor tasks status and results, restart queuesor delete.   

Here is the whole list of all tasks that can be displayed in the tab:    

  • sending settings;

  • sending Link settings;

  • sending SIP settings;

  • sending virtual numbers;

  • sending identifiers;

  • deleting identifiers;

  • sending identifiers to the elevator controller;

  • deleting identifiers from the elevator controller;

  • sending schedules;

  • deleting schedules.

There is a filter by device and status (new, queued, started, completer, error). So, you can configure a flexible data display and quick search. To do this, you need to click the Add filter button and set the necessary parameter/s.

You can select a few parameters and choose whether the results will match all filters or any of them. In addition, you can save your search parameters for further use by clicking the corresponding button. All saved parameters are displayed after clicking the Segments button.