/
Places

Places

In this tab, you can find: 

Menu description

  • List of places available to the user, with their devices and contacts;

  • Button to open a door. After successful opening, the icon turns green; if an error occurs, it turns red;

  • Button to call the device and/or watch the stream from its camera (if available); 

  • Buttons to call an elevator (EVRC-IP module must be used)

    .  

Places displayed in the menu correspond to groups the user is added to on the Link server. All available devices are also added to the group together with the user. Also, access rules created in the Link server are automatically applied to the user and the list of devices. All changes on the server are automatically updated in the app.

The following device types are available: 

  • panel: opening the door, calls/video calls (if there is a built-in camera) are available;

  • monitor: calls/video calls (if there is a built-in camera) are available;

  • access controller: opening the door is available. Each controller reader is displayed as a separate entry point using its configured reader name. Reader entry points display the controller icon and a button to open the door. Calls are not available for access controllers;

  • elevator controller: calling the elevator to the required floor.

IMG_0787 копія.tiff

Editing the device name

You can change the device name if you don't like what the administrator sets. To do it:

  1. Tap the card with the necessary device.

  2. Press Edit in the upper right corner.

  3. Enter the new device name and press Save.  

The device name changes only for the user app, it remains the same on the server.

Interaction with Siri Shortcuts (for IOS only)

You can add panels, access, and elevator controllers for opening locks or calling the elevator via Siri. You can configure it from the Link app as well as create a shortcut with the corresponding app. For each panel, access controller, and elevator controller, you can add your unique command to trigger a specific device. The quickest way to do this:

  1. Tap the card with the necessary device on the app.

  2. Press Add to Siri and record a voice command.

With the help of the Shortcuts app, you can add additional conditions for your command and add the open the door/call the elevator button on the Home screen. To do it, you must: 

  1. Open the Shortcuts app.

  2. Press the Pluss button

    in the upper right corner.  

  3. Enter shortcut name.

  4. Press Add action.

  5. Using the search find the BAS-IP Link app and select a required command from the list of available.  

  1. Add some additional information: 

  • for an elevator indicate its direction: up/down or you can be asked every time; 

  • for the opening the door command select which door you will open.

  1. When all is configured you can add the button with a shortcut to the Home screen for quick access. Press the Share button in the low left corner of the screen. 

8. Select add to Home screen option.  

9. As a result, the shortcut button will be displayed on the screen.