Call
- BAS-IP (Unlicensed)
In this tab, you have access to the following settings:
The sequence and availability of some parameters depend on your device operating system (IOS or Android).
enabling/disabling the use of device ringtone for SIP calls;
selection of protocol for media encryption: none, SRTP, ZRTP, DTLS;
enabling/disabling sending of out-bans DTMFs (SIP Info)/SIP Info DTMFs: sending of DTMF codes via the SIP INFO protocol (is used to send a code for the panel relay switch during a call);
enabling/disabling sending of in-band DTMFs (RFC 2833): sending of DTMF codes via the RFC 2833 protocol (is used to send a code for the panel relay switch during a call). BAS-IP devices support DTMF RFC 2833;
enabling/disabling all incoming calls auto-answer;
setting auto-answer time (in milliseconds) after which the call will be automatically taken (available when auto-answer is enabled);
setting URI for voice mail;
enabling/disabling usage of BAS-IP as the default phone app: the parameter is reserved;
enabling/disabling call notification repetition: the parameter is reserved.